Canyon Lake Custom Cabinets
Cabinet Refacing and Refinishing in Canyon Lake, TX
Cabinet refacing and refinishing in Canyon Lake, TX for solid boxes with dated doors or finish. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Canyon Lake and nearby communities.
Is it cheaper to reface cabinets or replace them entirely? If the boxes are still solid, refacing is almost always the better move. Canyon Lake Custom Cabinets inspects the existing boxes first, then replaces doors, drawer fronts, and finish instead of tearing out cabinetry that still has good bones.
This matters a lot in older lake houses where the box construction was solid but the finish hasn't held up to decades of humidity. A new veneer and sealed finish can make a kitchen look new without the cost or downtime of a full replacement.
What's included
What's Included With Cabinet Refacing and Refinishing
Typically included: inspection, surface prep, door replacement, veneer application, finish coating, hardware. Optional: wood filler repair on minor box imperfections, hardware upgrades. Customer prep: clear cabinet contents so we can access boxes fully during surface prep.
Want a clearer scope?
Get a Free EstimateHow it works
How Our Cabinet Refacing and Refinishing Process Works
Step 1Initial Inspection
We assess the existing boxes to confirm they're solid enough to reface.
Step 2Surface Preparation
Cabinet surfaces are cleaned and prepped for new materials.
Step 3Door Replacement
New doors are fitted to update the overall look.
Step 4Veneer Application
Veneer is applied to cabinet boxes for a refreshed surface.
Step 5Finish Coating
A new finish is applied to match the updated style and resist humidity.
Step 6Final Detailing
Hardware and trim are adjusted for a polished, finished result.
Materials
Materials and Methods for Cabinet Refacing and Refinishing
Veneer Sheets
Refreshes existing boxes without tearing out cabinetry that's still structurally sound.
Replacement Cabinet Doors
Updates the kitchen's look while keeping the original box footprint.
Wood Fillers
Repairs minor box imperfections common in older cabinetry before refinishing.
Stain Finishes
Renews wood tone and texture on boxes that have faded from years of lake-area humidity.
Hardware Upgrades
Updated handles and knobs chosen to complete the refreshed look.
Protective Topcoat
Seals the refinished surface against moisture and daily kitchen wear.
Questions on materials?
Get a Free EstimateCost
What Does a Cabinet Refacing and Refinishing Cost in Canyon Lake?
Refacing costs less than full replacement because the box construction stays in place. Here's what most projects run: Call for a free estimate once we've confirmed your existing boxes are in good enough shape to reface.
| Project type | Typical range | What’s included |
|---|---|---|
| Cabinet refacing | $3,000–$8,000, | new doors, drawer fronts, box resurfacing, and hardware on existing boxes. |
| Full kitchen refinish | $2,000–$5,000, | stripped and refinished existing doors and boxes without replacement. |
| Partial refacing (single wall or island) | $1,200–$3,000, | doors and finish updated on a smaller section. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and Codes for Cabinet Refacing and Refinishing
Always confirm specifics with Comal County before work starts, since requirements can shift based on scope.
| Typically needs a permit | Often no permit |
|---|---|
| Structural wall changes made as part of the same project | Door and drawer front replacement on existing boxes |
| Electrical work added alongside the refacing (new under-cabinet lighting circuits) | Veneer application and refinishing of existing cabinetry |
| — | Hardware upgrades and finish coating |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Pro for Cabinet Refacing and Refinishing
| DIY | Hire a pro |
|---|---|
| Painting cabinet doors yourself can work for a simple color refresh on boxes in good condition. | Veneer application requires even adhesion across the whole box, which is hard to get right without experience. |
| Swapping hardware is a reasonable weekend project with no special tools. | Matching stain color across old and new wood components takes a trained eye to avoid blotching. |
| — | A pro can confirm whether your boxes are actually solid enough to reface before you spend money on materials. |
Not sure DIY vs pro?
Get a Free EstimateBefore & after
Before and After Cabinet Refacing and Refinishing
Before 
After
FAQs
Cabinet Refacing and Refinishing FAQs
Is it cheaper to reface cabinets or replace them entirely?
Refacing almost always costs less because the box construction stays in place. Full replacement only makes sense if the boxes are structurally compromised.
How do I know if my cabinets need refinishing or full replacement?
If the boxes are solid and square with no water damage or warping, refinishing or refacing is usually the right call. Soft, swollen, or sagging boxes need full replacement.
How long does cabinet refacing take?
Most refacing projects run 1–2 weeks from inspection to final install, faster than a full cabinet replacement.
Can you match new doors to cabinets I'm keeping in another room?
If we can identify the original door style and finish, we can build matching replacements for a partial refacing job.
Next step
Get a Cabinet Refacing and Refinishing Estimate in Canyon Lake
Call Canyon Lake Custom Cabinets at +1 (254) 272-5366 or request a free estimate and we'll inspect your boxes before quoting.
---
More services
Other Custom Cabinets services
Custom Kitchen Cabinets
Custom kitchen cabinets built and installed in Canyon Lake, TX. Measured on-site, built to fit odd layouts, free estimates.
Custom Kitchen Remodels
Full custom kitchen remodels in Canyon Lake, TX, cabinetry-led from layout to install, with free written estimates.
Built-In Shelving And Wall Units
Custom built-in shelving and wall units in Canyon Lake, TX, measured on-site to fit real walls. Free estimates.
Ask about Cabinet Refacing and Refinishing
Tell us about the project and how to reach you.